Canon REALiS WUX4000 D, User Manual

Page: 43 / 188

43
Connecting the Projector
User’s Manual
Projectin
g
an Ima
g
e
■ Connecting to Analog Video Output Terminal (Analog Connection)
Component cable (Input signal type: [Component] – P48 )
A component video signal from the AV equipment can be inputted into the projector by
connecting the component cable to the ANALOG PC / COMPONENT IN terminal of the
projector.
Use a commercially available component cable that fits the terminal type of the AV equip-
ment to create a relay connection.
Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor will
reduce the audio volume.
AV equipment
When inputting corresponding audio signal
To ANALOG PC / COMPONENT
IN
Projector
RCA component
terminal
D terminal
Mini jack
AUDIO OUT terminal
RCA plug - RCA plug compo-
nent cable (not included)
Audio cable (not included)
D terminal plug - RCA plug
component convert cable
(not included)
Component cable
(not included)
To AUDIO IN
Video output ter-
minal
RCA terminal