![background image](http://html1.mh-extra.com/html/canon/realis-sx80-mark-ii-d/realis-sx80-mark-ii-d_supplementary-manual_4078867009.webp)
65h 3Ah 46h 30h 30h 31h 20h 53h 59h 53h 54h 45h 4Dh 20h 28h 55h 4Eh 4Bh 4Eh 4Fh 57h 4Eh 29h
65h 3Ah 46h 30h 30h 32h 20h 53h 59h 53h 54h 45h 4Dh 20h 28h 41h 46h 29h
65h 3Ah 46h 30h 30h 34h 20h 53h 59h 53h 54h 45h 4Dh 20h 28h 41h 4Bh 29h
65h 3Ah 46h 30h 30h 35h 20h 20h 53h 59h 53h 54h 45h 4Dh 20h 28h 41h 53h 43h 29h
65h 3Ah 45h 30h <numerical code> 20h 43h 4Fh 4Dh 4Dh 55h 4Eh 49h 43h 41h 54h 49h 4Fh 4Eh 5Fh 45h 52h 52h 4Fh 52h
65h 3Ah 31h 30h 30h 38h 20h 49h 4Eh 56h 41h 4Ch 49h 44h 5Fh 53h 43h 52h 45h 45h 4Eh 5Fh 41h 53h 50h 45h 43h 54h
65h 3Ah 32h 30h 30h <numerical code> 20h 49h 4Eh 56h 41h 4Ch 49h 44h 5Fh 53h 4Fh 55h 52h 43h 45h 20h 28h *** 29h
65h 3Ah 32h 30h 31h 30h 20h 4Eh 4Fh 5Fh 53h 49h 47h 4Eh 41h 4Ch
65h 3Ah 30h 38h 30h 31h 20h 49h 4Eh 56h 41h 4Ch 49h 44h 5Fh 56h 41h 4Ch 55h 45h
65h 3Ah 30h 38h 30h 32h 20h 49h 4Eh 56h 41h 4Ch 49h 44h 5Fh 56h 41h 4Ch 55h 45h
65h 3Ah 31h 30h 30h 32h 20h 4Eh 4Fh 5Fh 4Ch 4Fh 47h 4Fh 5Fh 43h 41h 50h 54h 55h 52h 45h 44h
65h 3Ah 31h 30h 30h 33h 20h 49h 50h 5Fh 4Eh 4Fh 54h 5Fh 41h 56h 41h 49h 4Ch 41h 42h 4Ch 45h
65h 3Ah 31h 30h 30h 34h 20h 50h 4Fh 57h 45h 52h 5Fh 4Dh 41h 4Eh 41h 47h 45h 4Dh 45h 4Eh 54h 5Fh 4Fh 46h 46h
65h 3Ah 31h 30h 30h 35h 20h 44h 49h 52h 45h 43h 54h 5Fh 50h 4Fh 57h 45h 52h 5Fh 4Fh 4Eh
65h 3Ah 32h 30h 33h <numerical code> 20h 49h 4Eh 56h 41h 4Ch 49h 44h 5Fh 52h 45h 53h 4Fh 4Ch 55h 54h 49h 4Fh 4Eh 28h *** 29h
69h 3Ah 49h 4Eh 50h 55h 54h 5Fh 4Eh 4Fh 54h 5Fh 46h 4Fh 55h 4Eh 44h
*
Error codes are four-digit hexadecimal strings. X represents a character in the range 0-9 or A-F.
*
Items with lower numbers are higher priority. (If multiple errors occur, the highest-ranked error is returned.
However, errors of the same number are ranked with the same priority.)
i:INPUT_NOT_FOUND
Input not switched. No input signal when
AUTOSETEXE=INPUT.
No particular measures regarding notification of status.
e:1005 DIRECT_POWER_ON
PMM=OFF not available when DPON=ON.
Use the setting DPON=OFF.
e:203X INVALID_RESOLUTION(***)
Invalid input signal resolution.
Accompanying information is indicated in
parentheses.
■
OVER_PANEL_RES: input signal resolution
exceeds panel resolution.
Switch to an input signal of the correct resolution.
e:1003 IP_NOT_AVAILABLE
IP conversion not possible.
Switch to a correct input signal.
e:1004 POWER_MANAGEMENT_OFF
DPON=ON not available when PMM=OFF.
Use a setting other than PMM=OFF.
e:0802 INVALID_VALUE
Numerical parameters are invalid or out of range.
Specify parameters in the correct range.
e:1002 NO_LOGO_CAPTURED
Cannot execute processing. User image not
registered.
Register a user image.
e:2010 NO_SIGNAL
No input signal.
Supply an input signal.
e:0801 INVALID_VALUE
Numerical parameters are invalid or out of range.
Specify parameters in the correct range.
e:1008 INVALID_SCREEN_ASPECT
Cannot execute command under current screen
aspect setting.
Change the screen aspect.
e:200X INVALID_SOURCE (***)
Cannot execute command with current input source.
The current input source is indicated in parentheses.
Change the input source.
e:F005 SYSTEM (ASC)
An internal error occurred at AUTOSETEXE=SCRN. Resolve the error and resend the command.
e:E0XX COMMUNICATION_ERROR
A communication protocol violation has occurred in
the projector.
Resend the command.
e:F002 SYSTEM (AF)
An internal error occurred at
AUTOSETEXE=FOCUS.
Resolve the error and resend the command.
e:F004 SYSTEM (AK)
An internal error occurred at AUTOSETEXE=VKS.
Resolve the error and resend the command.
e:F001 SYSTEM (UNKNOWN)
An internal error has occurred.
Resend the command.