View the plane from both the front and the back
and straighten any warps or bends
in the fuselage and the wings.
5˚
5˚
5˚
5˚
30˚
30˚
C amber the wing tips carefully.
C amber the wings carefully.
Dot towards the front.
Dot towards the front.
Level the camber on the main wings carefully
with your fingers, checking the curve
with the camber gauge.
Using the dihedral angle gauge,
make sure the dihedral angle for the main
wing is 5˚ and for the wing tips is 30˚.
Camber both wing tips and slightly.
Fold tabs on both ends of the main wing to form a 30˚ dihedral angle
using the gauge and then camber them as well.
Apply glue to the top surface of the folded tabs of the main wing.
Glue wing tips and onto them as shown.
Once again, check that the dihedral angle at the tip of the wing is 30˚
using the gauge.
FINISHING TOUCHES
Give the finishing touches to the plane
after it dries thoroughly.
- 3 -
Racer 539 Hawk: Assembly Instructions
