Points to Note at Installation
CAUTION:
Install the equipment, perform it before connecting the Host machine and a Finisher.
NOTE:
At the time of adjustment, prepare so that a Door Switch Tool is necessary.
How to check this Installation Procedure
Symbols in the Illustration
The frequently-performed operations are described with symbols in this procedure.
1x
1x
1x
Install
Screw
Packaged Item
Remove
Tighten
Loosen
1x
Connect
Connector
Disconnect
Install
Harness
(Common for Guides and Clamps)
Remove
1x
1x
1x
1x
Connect
Power Cord
Disconnect
Check visually
Check the sound
Check
OFF
Cleaning
ON
Push
Power
Unused Parts
4. Installation
16
Summary of Contents for Puncher Unit-BS1
