6. Align and insert the 2 holes on the Punch Dust Box Frame Unit to the 2 pins on the positioning pins inside the
Finisher to install it.
• 1 Screw (RS tightening; M4 x 8)
CAUTION:
When tightening screws, press down with the finger to prevent the Puncher Dust Box Frame Unit from moving.If the Puncher
Dust Box Frame Unit is installed at an angle, it will be difficult to install the Puncher Dust Box Unit due to the interference.
M4x8
1x
Hole
Punch Box
Frame Unit
Punch Box
Frame Unit
Punch Box
Frame Unit
Positioning Pin
4. Installation
21
Summary of Contents for Puncher Unit-BS1
