Canon PP2002, User Manual

Page: 2 / 9

2
SAFETY INFORMATION
READ BEFORE USE
Please read the following instructions and safety precautions before using the device.
For regulatory and additional safety information, refer to the Regulation and Warranty Information sheet included
in your package contents.
RMN : PP2002
Regulatory Model Identification Number is assigned for regulatory identification purpose.
WARNING

Keep away from children and infants. Improper use of this product may cause suffocation or accident.

Stop using the device immediately if it emits smoke or a strange smell, or otherwise behaves abnormally.

Do not look at the sun or bright lights through the viewfinder or the lens. Blindness or vision problems
could result.

Do not fire the flash near the eyes. It may hurt the eyes.

A strap wound around a child’s neck may result in asphyxiation. If your product uses a power cord,
mistakenly winding the cord around a child’s neck may result in asphyxiation.

Turn the device off in places where camera use is prohibited. The electromagnetic waves emitted by the
camera may interfere with operation of electronic instruments and other devices. Exercise adequate
caution when using the product in places where use of electronic devices is restricted, such as inside
airplanes and medical facilities.
CAUTION

When operating in extreme weather, the device might not print. Let the printer temperature adjust to the
recommended operating temperature of 59 to 90 F (15 to 32 C), before attempting to print again.

When charging, please charge the device at the recommended temperature of 59 to 90 F (15 to 32 C).

Use a soft dry cloth to clean the device. Do not clean with a damp cloth or volatile liquids such as paint
thinner.

Keep the top cover closed to avoid dust and other particles from entering the inside of the device.

If the device is not functioning properly, please contact the dealer you purchased this product from or
Canon Service & Support at www.usa.canon.com/support

Never expose the battery to high temperatures, direct heat, or dispose by incineration.

Electromagnetic interference or electrostatic discharge may cause the device to malfunction or the
memory to be lost or altered. Should this occur, use a pin, or similar item to press the [RESET] button at
the bottom of the device.