Canon PowerShot SX160 IS, User Manual

Page: 107 / 214

107
Specific Shutter Speeds and Aperture Values (<M> Mode)
• < D >: Manual
• Calculation of standard exposure is based on the specified metering method
( = 82).
Still Images
Adjusting the Flash Output
Choose from the three flash levels in < D > mode.
1
Enter < D > mode.
z z Set the mode dial to < D >.
2
Configure the setting.
z z Press the < m > button, choose [ X ] in
the menu, and adjust the setting by either
pressing the <
q
><
r
> buttons or turning
the <
5
> dial ( = 37).
X X Once the setting is complete, [
X
] is
displayed.
• You can also set the flash level by accessing < n > ( = 38) and
choosing [Flash Output] in [Flash Settings] on the [
4
] tab.
• You can set the flash level in < M > or < B > mode by accessing < n >
( = 38), choosing [Flash Settings] on the [
4
] tab, and then setting [Flash
Mode] to [Manual].
• You can also access the [Flash Settings] < n > screen as follows.
- When the flash is up, press the < r > button and immediately press the
< n > button.
COP
Y