Canon PowerShot SD100, User Manual

Page: 81 / 191

79
Shoo
ting
You can lock the flash exposure so that the exposure settings are correctly
set for a particular portion of your subject.
To release the FE lock
Press the button.
The FE lock may release if you press any button other than the
button.
Locking the Flash Exposure Setting (FE Lock)
1
Press the DISP. button to turn the
LCD monitor on.
2
Press the button to set the flash
to .
3
Focus on the part of the subject on
which you wish to lock the flash
exposure setting.
4 Press and hold the shutter button
halfway until two beeps sound.
Without releasing your finger, press
the
button.
• The flash will fire a pre-flash and lock the
flash exposure to the required intensity to
illuminate the subject.
• The icon will display.
5
Re-aim the camera to compose the
shot as desired and press the
shutter button fully.