Canon PowerShot SD100 User Manual Download Page 114

Page: 114 / 191

112

You can protect important images from accidental erasure.

To cancel protection

After step 1, select an image to remove protection from and press the

SET

button.

Please note that formatting (initializing) an SD card erases all data,
including protected images.

Protecting Images

In the

(Play) menu, select

and press the SET button.

See

Selecting Menus and Settings

(p. 44).

Use the

button to select an

image to protect and press the SET
button.

• The

icon appears on protected images.

• You can make the selection of images

easier by toggling between single image
replay and index replay by pressing the
zoom lever toward

Press the MENU button.

The Play menu displays again. Press it again
to return to the Play screen.

Protection Icon

Summary of Contents for PowerShot SD100
































































































































































































Search results

Summary of Contents for PowerShot SD100

Reviews:

Related manuals for PowerShot SD100

Brands by name

Popular brands

Canon PowerShot SD100, User Manual

Search results

Summary of Contents for PowerShot SD100

Reviews:

Related manuals for PowerShot SD100

Brands by name

Popular brands