manualshive.com logo in svg

Canon Powershot S80, User Manual

Share
Download
Canon Powershot S80 User Manual Download Page 7

5

z

In the following pages, the term "equipment" refers primarily to the 
camera, its batteries and battery charger, separately sold compact 
power adapter, car battery charger and high-power flash.

Warnings

About the Memory Card

Store the memory card out of the reach of children and infants. 

It may be swallowed 

accidentally. If this occurs, consult a doctor immediately.

z

Do not aim the camera directly into the sun or at other intense light sources

 that 

could damage your eyesight.

z

Do not trigger the flash in close proximity to human or animal eyes.

 Exposure to 

the intense light produced by the flash may damage eyesight. In particular, remain at 
least one meter (39 inches) away from infants when using the flash.

z

Store this equipment out of the reach of children and infants.

 Accidental damage to 

the camera or batteries by a child could result in serious injury. In addition, placement of 
the strap around a child's neck could result in asphyxiation.

z

Do not attempt to disassemble or alter any part of the equipment that is not 
expressly described in this guide.

 Disassembly or alteration may result in high-

voltage electrical shock. Internal inspections, alterations and repairs should be 
conducted by qualified service personnel authorized by your camera distributor or a 
Canon Customer Support Help Desk.

z

To avoid the risk of high-voltage electrical shock, do not touch the flash portion 
of the camera if it has been damaged.

 Similarly, never touch internal portions of the 

equipment that become exposed as a result of damage. There is a risk of high-voltage 
electrical shock. Please take the first opportunity to consult your camera distributor or 
the closest Canon Customer Support Help Desk.

z

Stop operating the equipment immediately if it emits smoke or noxious fumes. 

Failure to do so may result in fire or electrical shock. Immediately turn the camera's 
power off, remove the batteries and unplug the power cord from the power outlet. 
Confirm that smoke or fume emissions have ceased. Please consult your camera 
distributor or the closest Canon Customer Support Help Desk.

z

Stop operating the equipment immediately if it is dropped or the casing is 
damaged. Immediately turn the camera's power off, remove the batteries or 
unplug the power cord from the power outlet.

 Continued use of the equipment may 

result in fire or electrical shock. Please consult your camera distributor or the closest 
Canon Customer Support Help Desk.

EC176CUG_E.book  Page 5  Tuesday, June 28, 2005  12:40 PM

Summary of Contents for Powershot S80




































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands