manualshive.com logo in svg

Canon Powershot S80, User Manual

Share
Download
Canon Powershot S80 User Manual Download Page 45

43

Using 

the Mode Dial

3

z

The recording time may not display properly during shooting or filming 
may stop unexpectedly with the following types of memory cards.

- Slow recording cards
- Cards formatted on a different camera or a computer
- Cards which have had images recorded and erased repeatedly

z

Although the recording time may not display properly during shooting, 
the movie will be recorded correctly on the memory card. Recording 
time will display properly if you format the memory card in this camera 
(excluding slow recording memory cards).

z

You are recommended to use a memory card that has been formatted 
in your camera to shoot movies (p. 23). The card supplied with the 
camera may be used without further formatting.

z

Be careful not to touch the microphone while shooting.

z

Do not press buttons other than the shutter button while filming to 
avoid inadvertent recording of the operation sounds.

z

If the upper indicator blinks green after a shot, this indicates that the 
movie is being written to the memory card. You cannot shoot again 
until the blinking stops.

z

You may experience frame dropping and audio breakup when playing 
back a movie on a computer with insufficient system resources.

‹

See page 160 for settings that can be changed in this mode.

‹

Resolution/Frame Rate (p. 33)

‹

The following operations are available before movie recording:

- AF lock: Pressing the 

MF

 button activates AF lock with the current 

conditions. 

 appears on the LCD monitor. You can cancel AF lock 

by pressing the MF button again.

- Manual Focus (p. 64)
- AE lock, exposure shift: Press the 

 button to enable AE lock. The 

exposure shift bar appears on the LCD monitor, and exposure can be 
changed turning the multi control dial. You can cancel AE lock by 
pressing the 

 button again. When pressing the MENU button or 

changing the white balance, photo effects and shooting modes, AF 
lock is canceled.

‹

Sound is recorded in monaural.

‹

There is no shutter sound in Movie mode.

Continued on next page>>

EC176CUG_E.book  Page 43  Tuesday, June 28, 2005  12:40 PM

Summary of Contents for Powershot S80




































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands