Canon PowerShot G16 User Manual Download Page 122

Page: 122 / 214

122

1
2
3
4
5

7
8
9
10

Cover

Before Use
Common Camera

Operations

Advanced Guide

Camera Basics
Auto Mode /

Hybrid Auto Mode
Other Shooting

Modes

Tv, Av, M, C1,

and C2 Mode
Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

Basic Guide

P Mode

Movies

Editing Movies

You can cut movies to remove unneeded portions at the beginning or end.

Choose [

Following steps 1 – 5 in “Viewing”

(

102

), choose [

] and press the

> button.

The movie editing panel and editing bar

are now displayed.

Specify portions to cut.

Press the <

> buttons to choose

[ ] or [ ].

To view the portions you can cut

(identified by [

] on the screen), press

the <

> buttons or turn the <

dial to move [ ]. Cut the beginning of the

movie (from [ ]) by choosing [ ], and

cut the end of the movie by choosing

[ ].

If you move [ ] to a position other than a

[ ] mark, in [ ] the portion before the

nearest [ ] mark on the left will be cut,

while in [ ] the portion after the nearest

[ ] mark on the right will be cut.

Movie Editing Panel

Movie Editing Bar

Review the edited movie.

Press the <

> buttons to choose

[ ], and then press the <

> button.

The edited movie is now played.

To edit the movie again, repeat step 2.

To cancel editing, press the <

buttons to choose [ ]. Press the <

button, choose [OK] (either press the

> buttons or turn the <

> dial),

and then press the <

> button again.

Save the edited movie.

Press the <

> buttons to choose

[ ], and then press the <

> button.

Press the <

> buttons or

turn the <

> dial to choose [New File],

and then press the <

> button.

The movie is now saved as a new file.

Choose [Save w/o Comp.], and then

press the <

> button.

Summary of Contents for PowerShot G16























































































































































































































Search results

Summary of Contents for PowerShot G16

Reviews:

Related manuals for PowerShot G16

Brands by name

Popular brands

Canon PowerShot G16, User Manual

Search results

Summary of Contents for PowerShot G16

Reviews:

Related manuals for PowerShot G16

Brands by name

Popular brands