27
3.15 Disassembly of OPTICAL ASS'Y-1
(1) Apply voltage (approx. 2.0 V) to the motor terminal to extend the lens barrel until it stops.
(2) Peel off the FRONT CAP TAPE and detach the FRONT CAP.
Note: For the OPTICAL ASS'Y Adjustment jot down the data written on the OPTICAL ASS'Y.
You will need it later.
<Note on Reassembling>
(1) Attach the FRONT CAP TAPE and FRONT CAP as shown in the figure below.
4
FRONT CAP
FRONT CAP TAPE
FRONT CAP
FRONT
CAP TAPE
Note on Reassembling (1)
Dowel
MOTOR
(1)
approx.
2 V
+
-
(1)
(2)
Lens barrel
Apply alcohol to the connected section
and detach the FRONT CAP after the
alcohol is fully absorbed.
Tweezers
FOCUS PI
marked position
Note
