
13
3.6
Disassembly of LCD ASS'Y
(1) Turn the HINGE UNIT, renove four screws (d
×
4), and then detach the LCD REAR COVER.
(2) Peel off the DOUBLE-SIDED TAPE and open the LCD INSULATION SHEET.
(3) Remove one screw (e
×
1), disconnect the CN4303, and then detach the HINGE UNIT.
Note: Since the CN4303 has a peculiar shape, detach the connector as shown below.
CD4-3835-000
3.0mm
BLACK
M1.4
(NK GRIP)
d
CD3-0680-000
2.0mm
SILVER
M1.4
e
Note
(1)
(3)
CN4303
LCD INSULATION
SHEET
LCD REAR COVER
HINGE UNIT
DOUBLE-SIDED
TAPE
(3)
(1)
(2)
CN4303
Pull-out holes
Pull it out in the
arrow direction.
Do not pull the connector
by the cable as this may
break the cable or
damage the connector.
(1) - d
(1) - d
(1) - d
(1) - d
(3) - e
Insert the fine tip of a tool (such as tweezers) into the pull-out holes to pull out the connector by
alternatively moving the right and left sides little by little.