41
Sh
oo
ting
When you set the shutter speed, the camera automatically selects
an aperture value to match the brightness of the subject. Faster
shutter speeds allow you to catch an instantaneous image of a
moving subject, while slower speeds create a flowing effect and
allow you to shoot without a flash in dark areas.
Setting the Shutter Speed
Shooting Mode
z
If the aperture value is shown in red, the image is
underexposed (insufficient light) or overexposed (too much
light). Use the
or
button to adjust the shutter speed
until the aperture value shows in white.
z
The nature of CCD image sensors is such that noise in the
recorded image increases at slow shutter speeds. This
camera, however, applies special processing to images
shot at shutter speeds slower than 1.3 seconds to
eliminate the noise, thereby producing high-quality images.
(However, a certain amount of processing time may be
required before the next image can be shot.)
z
The aperture value and shutter speed change according to
the zoom state as follows
z
The fastest shutter speed for flash synchronization is 1/500
second. The camera automatically resets the shutter speed
to 1/500 second if a faster speed is selected.
Shooting
Mode
Aperture
Value
Shutter Speed
(seconds)
Maximum
Wide Angle
f/2.8 – 3.5
15 – 1/1500
f/2.8 – 3.5
15 – 1/1250
,
f/4.0 – 8.0
15 – 1/2000
Maximum
Telephoto
f/4.8 – 6.3
15 – 1/1500
f/4.8 – 6.3
15 – 1/1250
,
f/7.1 – 8.0
15 – 1/2000
Summary of Contents for PowerShot A710 IS
Page 135: ...133 MEMO ...
