Canon PowerShot A495 Getting Started Download Page 96

Page: 96 / 175

Shooting in Program AE

You can choose the settings for various functions to suit your preferences.
AE stands for Auto Exposure.

Enter

mode (p. 40).

●

After pressing the

button, press the

buttons to choose

, then press the

button.

Adjust the settings according to
your purposes (pp. 60 – 68).

Shoot.

Adjusting the Brightness (Exposure
Compensation)

You can adjust the standard exposure set by the camera in 1/3-stop
increments in the range of –2 to +2.

Enter Exposure Compensation
mode.

●

Press the

button.

Adjust the brightness.

●

While watching the screen, press he

buttons to adjust the brightness and press
the

button.

The exposure compensation amount will
appear on the screen.

What if the shutter speed and aperture value appear in
orange?

If a correct exposure cannot be obtained when pressing the shutter
button halfway, the shutter speed and aperture value are shown in
orange. Try the following settings to obtain the correct exposure.

•

Turn on the flash (p. 61)

•

Choose a higher ISO speed (p. 64)

Downloaded From camera-usermanual.com Canon Manuals

Summary of Contents for PowerShot A495
















































































































































































Search results

Summary of Contents for PowerShot A495

Reviews:

Brands by name

Popular brands

Canon PowerShot A495, Getting Started

Search results

Summary of Contents for PowerShot A495

Reviews:

Brands by name

Popular brands