Canon PowerShot A495 Page 143 Getting Started Download

Page: 143 / 175

Changing Playback Function Settings

107

●

Displaying the Overlay

You can display gridlines for vertical and horizontal guidance, or a 3:2 guide
to confirm the printable area for postcard size prints.

●

Choose [Disp. Overlay], then press the

buttons to choose an option.

Changing Playback Function Settings

You can adjust the settings in the

tab by pressing the

button (p. 45).

●

Choosing the Image that First Displays in
Playback

●

Choose [Resume], then press the

buttons to choose an option.

Grid Lines

A grid overlays the display.

3:2 Guide

Gray bars will appear on the top
and bottom of the display. This
area will not print when printing
on paper with a 3:2 aspect ratio.

Both

Both grid lines, and the 3:2
guide will display.

•

mode, you cannot set [3:2 Guide] or [Both].

•

Grid Lines will not be recorded on the image.

•

The gray areas displayed with [3:2 Guide] are the areas that will not be
printed. The actual image recorded will include the portion in the gray
areas.

Last seen

Resumes with the image last
viewed.

Last shot

Resumes with the most recently
shot image.

Downloaded From camera-usermanual.com Canon Manuals

Summary of Contents for PowerShot A495
















































































































































































Search results

Summary of Contents for PowerShot A495

Reviews:

Related manuals for PowerShot A495

Brands by name

Popular brands

Canon PowerShot A495, Getting Started

Search results

Summary of Contents for PowerShot A495

Reviews:

Related manuals for PowerShot A495

Brands by name

Popular brands