Canon PIXMA TS5150 Online Manual Download Page 280

Page: 280 / 348

Press down the ink cartridge locking cover until it clicks into place.

•

When copying, see also the sections below:

Check6

Is platen glass dirty?

Clean the platen glass.

Cleaning the Platen Glass and Document Cover

Check7

Make sure original is properly loaded on platen glass.

Loading Originals

Check8

Is original loaded with side to be copied facing down on platen glass?

Check9

Did you copy a printout done by this printer?

If you use a printout done by this printer as the original, print quality may be reduced depending on the condition
of the original.

Print from the printer directly, or reprint from the computer if you can reprint from it.

280

Summary of Contents for PIXMA TS5150





























































































































































































































































































































































Search results

Summary of Contents for PIXMA TS5150

Reviews:

Canon PIXMA TS5150, Online Manual, Page: 280 / 348

Search results

Summary of Contents for PIXMA TS5150

Reviews: