Canon PIXMA GM4000 Series Online Manual Download Page 115

Page: 115 / 447

Examining the Nozzle Check Pattern

Examine the nozzle check pattern, and clean the print head if necessary.

Note

• When an optional FINE cartridge is installed, the different nozzle check pattern is printed.

Checking Color Pattern

Checking Black-and-White Pattern

Check if there are missing lines in the pattern.

If there are missing lines in the pattern:

A: Good
B: Bad (lines are missing)

If the pattern is not printed:

If one of the above is applied,

cleaning the print head

is required.

Checking Color Pattern

Check if there are missing lines in the pattern C or horizontal white streaks in the pattern D.

If there are missing lines in the pattern C:

E: Good
F: Bad (lines are missing)

115

Summary of Contents for PIXMA GM4000 Series
































































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA GM4000 Series

Reviews:

Related manuals for PIXMA GM4000 Series

Brands by name

Popular brands

Canon PIXMA GM4000 Series, Online Manual

Search results

Summary of Contents for PIXMA GM4000 Series

Reviews:

Related manuals for PIXMA GM4000 Series

Brands by name

Popular brands