Message Is Displayed
This section describes some of the messages that will be displayed on the computer screen.
Error Regarding Power Cord Being Unplugged Is Displayed (Windows)
Writing Error/Output Error/Communication Error (Windows)
Other Error Messages (Windows)
Error Regarding Power Cord Being Unplugged Is Displayed (Windows)
The printer may have been unplugged while it was on.
Check the error message displayed on the computer and click
OK
.
The printer starts printing.
See
to unplug the printer correctly.
Writing Error/Output Error/Communication Error (Windows)
Check 1
If the
ON
lamp is off, make sure printer is plugged in and turn on.
The
ON
lamp flashes while the printer is initializing. Wait until the
ON
lamp stops flashing and remains lit.
Check 2
Make sure printer is properly connected to computer.
Make sure it is securely connected to both the printer and the computer. When the USB cable is securely
plugged in, check the following:
• If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the
computer, and retry the printing. If printing starts normally, there is a problem with the relay device.
Contact the vendor of the relay device.
• There could also be a problem with the USB cable. Replace the USB cable and retry the printing.
Check 3
Make sure MP Drivers are installed correctly.
Refer to
to uninstall unnecessary drivers and install the latest drivers.
Check 4
Check device status from your computer.
Follow the procedure below to check the device status.
1. Select
Control Panel
>
Hardware and Sound
>
Device Manager
.
1.
Note
• If the
User Account Control
screen is displayed, select
Yes
.
2. Open
USB Printing Support Properties
.
2.
Double-click
Universal Serial Bus controllers
and
USB Printing Support
.
326
Summary of Contents for PIXMA G2070 Series
