Canon PIXMA E474 Online Manual Download Page 78

Page: 78 / 297

Front View

(1) document cover

Open to load an original on the platen glass.

(2) paper support

Open to load paper in the rear tray.

(3) paper guide

Align with the left side of the paper stack.

(4) rear tray

Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same
time, and fed automatically one sheet at a time.

Loading Plain Paper / Photo Paper
Loading Envelopes

(5) cover

Open to replace the FINE cartridge or remove jammed paper inside the printer.

(6) paper output tray

Printed paper is ejected. Pull out it before printing.

(7) output tray extension

Extend to support ejected paper. Extend it when printing.

Summary of Contents for PIXMA E474










































































































































































































































































































Search results

Summary of Contents for PIXMA E474

Reviews:

Brands by name

Popular brands

Canon PIXMA E474, Online Manual

Search results

Summary of Contents for PIXMA E474

Reviews:

Brands by name

Popular brands