Canon Perfect Binder-F1 User Manual Download

Page: 9 / 74

viii

CAUTION



Use a power supply with specifications compatible with 208-240 V AC.



Make sure that the power supply and the voltage are stable.



Do not plug other equipment into the same outlet as the machine.



Leave sufficient space around the power plug so that it can be unplugged easily. If
objects are placed around the power plug, you will be unable to unplug it in an
emergency.



Disconnect the power cord for safety when the machine will not be used for an
extended period of time.

Shutting Down the Machine in an Emergency

This machine has a breaker that detects excess current or leakage current.

Make sure to turn the breaker switch to the OFF ("

" side) position, and then turn

OFF the main power in an emergency.

ON
( )

OFF

( )

Summary of Contents for Perfect Binder-F1











































































Search results

Summary of Contents for Perfect Binder-F1

Reviews:

Related manuals for Perfect Binder-F1

Brands by name

Popular brands

Canon Perfect Binder-F1, User Manual

Search results

Summary of Contents for Perfect Binder-F1

Reviews:

Related manuals for Perfect Binder-F1

Brands by name

Popular brands