Canon PAPER CRAFT Moving Tiger through o ring of... Assembly Instructions Manual Download Page 2

Page: 2 / 6

Using a round bar

or similar item makes

it easier to assemble

the round pillars.

Note

: Glue this part together after assembling

the completed parts 13 and 18.

Glue this piece in place so that it fits precisely

into the windows cut in parts 1 and 10.

*Use glue on the window surface only.

Do not glue the sides.

(Moving) Tiger through a ring of fire : Assembly Instructions

Canon Inc.

Hideharu Naitoh & F design

Summary of Contents for PAPER CRAFT Moving Tiger through o ring of...

Page 2: ...rt together after assembling the completed parts 13 and 18 Glue this piece in place so that it fits precisely into the windows cut in parts 1 and 10 Use glue on the window surface only Do not glue the sides Moving Tiger through a ring of fire Assembly Instructions Canon Inc Hideharu Naitoh F design ...

Page 3: ...e this could cause the part to warp Open the notch slightly to the left and right Parts and Note Glue the remaining surface through which the lever runs here Moving Tiger through a ring of fire Assembly Instructions Canon Inc Hideharu Naitoh F design ...

Page 5: ...Parts and Moving Tiger through a ring of fire Assembly Instructions Canon Inc Hideharu Naitoh F design ...

Page 6: ...38 using a round bar or similar item Glue to the reverse side of part 38 Place the tiger s front paws at the center of the hexagonal stand as shown in the illustration Attach the rear legs to this part in this position Finished Moving Tiger through a ring of fire Assembly Instructions Canon Inc Hideharu Naitoh F design ...