Océ VarioPrint 6000+ Customer Expectations Document
Version 1
Océ VarioPrint 6000+ Series Customer Expectations Document
Page 50
15. Media Usage/Compatibility
The Océ VarioPrint 6000+ Series
maintains reliable, predictable, and high-quality
output. Consistency of the output is dependent on knowing and compensating for
the variables of a print job. The Océ VarioPrint 6000+ Series
incorporates many
control systems which compensate for environmental and print process conditions.
Another variable is the print media. Knowing the characteristics of the media
facilitates optimal print output.
15.1 Media Characteristics by Media Library Parameters
This section describes the standard media library characteristics and parameters.
The following settings can be manually adjusted through the Settings Editor >
Media > Add icon. The Settings Editor can only be accessed via a Web browser
using the IP address of the Océ VarioPrint 6000+ Series.
The IP address of the Océ VarioPrint 6000+ Series is found on the machine’s
operator panel through System > Local key operator settings > Connectivity >
TCP/IP address.
The table below describes the Add new media settings and each setting’s
description.
Setting
Description
Name
Set the name of the media.
Type
Set the brand name of the paper.
Size
Select the size of the paper from the drop-down list, including
custom size paper.
Width (0.01 inches)
Specify the width of the custom paper in millimeters or inches.
Length (0.01 inches)
Specify the length of the custom paper in millimeters or inches.
Tab sheet
Select the check box to use tab paper, and then enter the cycle
length (how many tabs in one set).
Insert
Select the check box to use the paper as a sheet insertion, and
then enter the cycle length (how many sheet insertions in a set).
Oriented
Specify letterhead or pre-punched paper.
Cycle length
Set the value 1 to N. Where “N” is the number of sheets in one
cycle. Must specify the cycle length when specifying tab sheets
or sheet insertions.
Punch count
Specify how many holes are in the pre-punched paper.
Weight (lb Bond / lb Index)
Specify the weight of the paper in g/m
2
or lb.
Color
Specify the color of the paper. This setting acts as an identifier to
display the color of the paper on the operator panel.
RGB Color
Specify the RGB color value (0-255) for identification purposes
on the operator panel.
Surface type
Specify the type of paper (e.g., Vellum, Coated, Textured).
