Océ VarioPrint 135/120/110 Service Guide
Revision 3
Lighting
Canon USA recommends installing the machine in a location with at least
500 lux of lighting 750
and maintenance.
Sunlight
Avoid installing the machine in direct sunlight. Direct sunlight has adverse
effects on toner consistency and image quality. If direct sunlight is
unavoidable, use curtains to shade the machine.
curtains do not block the machine’s ventilation slots or louvers, or
interfere with the electrical cord or power supply.
J. PRISMAsync Controller Firmware
The PRISMAsync Controller firmware can be installed from a local drive via
the Settings Editor or from a USB flash drive (USB Stick).
CAUTION
The parameters of the USB flash drive, used as the USB stick and USB Key,
are very specific, reference the
these parameters may result in an error when backing up the system or an
error during firmware installation.
WARNING
The USB flash drives used to create a system backup and to
must not be used interchangeably. The preparation process to install firmware
requires that the USB flash drive be formatted. Any data on the USB flash
drive would be lost. This will include any system backup data.
1.
PRISMAsync Controller Sy
The USB Key is available to save a back up of the PRISMAsync
controller system and licenses.
It is highly recommended that a service technician/system engineer
create a system backup to the USB key after device installation, a major
system change
A service technician/system engineer can restore the PRISMAsync
controller system and licenses after an upgrade or system failure. The
USB key must be kept with the
2.
PRISMAsync Controller Firmware Update via the U
PRISMAsync Controller firmware updates are available as a service part
and can be ordered by the dealer.
A USB flash drive (USB stick), available for purchase, is used by the
service
technician/system
engineer
to
upgrade
or
restore
the
PRISMAsync controller firmware. The process to prepare the USB stick
(to make it ready to install
contents) and downloads the new firmware to the USB stick.
During the PRISMAsync Controller firmware update process,
firmware is erased
Océ VarioPrint 135/120/110
Service Guide
Canon USA recommends installing the machine in a location with at least
500 lux of lighting 750 mm (29 ½”) above the floor for normal operations
and maintenance.
Avoid installing the machine in direct sunlight. Direct sunlight has adverse
effects on toner consistency and image quality. If direct sunlight is
unavoidable, use curtains to shade the machine. Make sure that the
curtains do not block the machine’s ventilation slots or louvers, or
interfere with the electrical cord or power supply.
PRISMAsync Controller Firmware Upgrade
The PRISMAsync Controller firmware can be installed from a local drive via
e Settings Editor or from a USB flash drive (USB Stick).
The parameters of the USB flash drive, used as the USB stick and USB Key,
are very specific, reference the
USB Flash Drive Specifications (for the U
. Using a USB flash drive that does not meet
these parameters may result in an error when backing up the system or an
error during firmware installation.
The USB flash drives used to create a system backup and to
must not be used interchangeably. The preparation process to install firmware
requires that the USB flash drive be formatted. Any data on the USB flash
drive would be lost. This will include any system backup data.
PRISMAsync Controller System Backup
The USB Key is available to save a back up of the PRISMAsync
controller system and licenses.
It is highly recommended that a service technician/system engineer
create a system backup to the USB key after device installation, a major
ge, or a system upgrade.
A service technician/system engineer can restore the PRISMAsync
controller system and licenses after an upgrade or system failure. The
USB key must be kept with the VarioPrint Device.
sync Controller Firmware Update via the USB Stick
PRISMAsync Controller firmware updates are available as a service part
and can be ordered by the dealer.
A USB flash drive (USB stick), available for purchase, is used by the
service
technician/system
engineer
to
upgrade
or
restore
the
controller firmware. The process to prepare the USB stick
to make it ready to install firmware) formats the USB stick (eliminating all
contents) and downloads the new firmware to the USB stick.
During the PRISMAsync Controller firmware update process,
firmware is erased, new firmware is installed from the USB stick.
/110 Service Guide
January 2013
Page 40
Canon USA recommends installing the machine in a location with at least
ve the floor for normal operations
Avoid installing the machine in direct sunlight. Direct sunlight has adverse
effects on toner consistency and image quality. If direct sunlight is
Make sure that the
curtains do not block the machine’s ventilation slots or louvers, or
The PRISMAsync Controller firmware can be installed from a local drive via
The parameters of the USB flash drive, used as the USB stick and USB Key,
USB Flash Drive Specifications (for the USB
Using a USB flash drive that does not meet
these parameters may result in an error when backing up the system or an
The USB flash drives used to create a system backup and to install firmware
must not be used interchangeably. The preparation process to install firmware
requires that the USB flash drive be formatted. Any data on the USB flash
The USB Key is available to save a back up of the PRISMAsync
It is highly recommended that a service technician/system engineer
create a system backup to the USB key after device installation, a major
A service technician/system engineer can restore the PRISMAsync
controller system and licenses after an upgrade or system failure. The
SB Stick
PRISMAsync Controller firmware updates are available as a service part
A USB flash drive (USB stick), available for purchase, is used by the
service
technician/system
engineer
to
upgrade
or
restore
the
controller firmware. The process to prepare the USB stick
formats the USB stick (eliminating all
contents) and downloads the new firmware to the USB stick.
During the PRISMAsync Controller firmware update process, the current
, new firmware is installed from the USB stick.
