Canon MX390 series Page 109 Online Manual Download

Page: 109 / 170

Basic Mode Tab

This mode allows you to scan easily by following the on-screen steps.

This section describes the settings and functions available on the

Basic Mode

tab.

When scanning from the ADF (Auto Document Feeder), documents are scanned without preview.

(1)

Settings and Operation Buttons

Note

The displayed items vary by document type and view.

(1) Settings and Operation Buttons

•

Select Source

•

Photo (Color)

Scan color photos.

•

Magazine (Color)

Scan color magazines.

•

Document (Color)

Scan documents in color.

•

Document (Grayscale)

Scan documents in black and white.

•

Document (Color) ADF Simplex

Scan documents from the ADF in color.

•

Document (Grayscale) ADF Simplex

Scan documents from the ADF in black and white.

•

Document (Color) ADF Duplex (Auto Duplex ADF models only)

Scan both sides of documents from the ADF in color.
Documents are scanned in the long-edge binding format, with the end inserted to the ADF being
the upper end.

•

Document (Grayscale) ADF Duplex (Auto Duplex ADF models only)

Scan both sides of documents from the ADF in black and white.

Summary of Contents for MX390 series











































































































































































Search results

Summary of Contents for MX390 series

Reviews:

Related manuals for MX390 series

Brands by name

Popular brands

Canon MX390 series, Online Manual

Search results

Summary of Contents for MX390 series

Reviews:

Related manuals for MX390 series

Brands by name

Popular brands