Canon MVX30 Instruction Manual Download

Page: 114 / 163

114

Protecting Images

You can protect important images from accidental erasure when displaying a single

image or index screen.

If a memory card is formatted, all still images and movies, even protected ones,
will be erased permanently.

❍

The sample images recorded on the supplied SD Memory Card are already
protected.

❍

Movies can only be protected when the first scene is displayed as a still image.

1. Select the image you wish to protect.

2. Press the SET dial to open the FILE OPER. menu.

In CARD CAMERA mode, the menu appears when you press the SET dial while you are

reviewing a still image, or when you press the SET dial right after recording.

3. Select [

PROTECT].

• “

” appears and now the image cannot be erased.

• To cancel the protection, press the SET dial.

4. Select [

RETURN] to close the menu.

Protecting during Index Screen Display

1. Move the zoom lever toward

• Up to 6 images appear.

• Select the image you wish to protect.

2. Open the menu and select [CARD OPERATIONS]. Select [

PROTECT]

and press the SET dial.

• “

” appears on the image.

• To cancel the protection, press the SET dial.

3. Close the menu.

CARD PLAY

CARD CAMERA

PLAY (VCR)

CAMERA

CARD PLAY

CARD CAMERA

PLAY (VCR)

CAMERA

PROTECT

CARD OPERATIONS

(

35)

Summary of Contents for MVX30




































































































































































Search results

Summary of Contents for MVX30

Reviews:

Related manuals for MVX30

Brands by name

Popular brands

Canon MVX30, Instruction Manual

Search results

Summary of Contents for MVX30

Reviews:

Related manuals for MVX30

Brands by name

Popular brands