Canon MVX20i Instruction Manual Download

Page: 70 / 164

Magnifying the Image

The playback image can be magnified up to 5 times.

1. Move the zoom lever toward

• The image is magnified by 2 times.

• A frame appears indicating the position of the magnified area.

• To further enlarge the image, move the zoom lever toward

To shrink the image below 2 times magnification, move the zoom lever toward

2. Select the magnified area with the SET dial.

• Turn the SET dial to move the image to the right and left, or up

and down. Pressing the SET dial switches between the

directions.

• To cancel the magnification, move the zoom lever toward

until the frame

disappears.

Movies played back from a memory card cannot be magnified.

CARD PLAY

CARD CAMERA

PLAY (VCR)

CAMERA

SET dial

Zoom lever

Summary of Contents for MVX20i





































































































































































Search results

Summary of Contents for MVX20i

Reviews:

Related manuals for MVX20i

Brands by name

Popular brands

Canon MVX20i, Instruction Manual

Search results

Summary of Contents for MVX20i

Reviews:

Related manuals for MVX20i

Brands by name

Popular brands