Canon MV830 Instruction Manual Download

Page: 29 / 147

Basic Functions

Recordin

Tips for Making Better Videos

Holding the Camcorder

For maximum stability, grip the camcorder in your right hand and keep your
right elbow pressed against your body. If necessary, support the camcorder
with your left hand. Be careful that your fingers do not touch the microphone
or lens.

For More Stability

Lighting

When recording outdoors, we
recommend recording with the sun at
your back.

When using a tripod, do not leave the viewfinder exposed to direct sunlight as it
may melt (due to concentration of the light by the lens).

Do not use tripods with fastening screws longer than
5.5 mm (0.2 in.) as it may damage the camcorder.

Lean against a wall

Put the camcorder on a table

Lie on your elbow

Kneel on one knee

Use a tripod

Summary of Contents for MV830




















































































































































Search results

Summary of Contents for MV830

Reviews:

Related manuals for MV830

Brands by name

Popular brands

Canon MV830, Instruction Manual

Search results

Summary of Contents for MV830

Reviews:

Related manuals for MV830

Brands by name

Popular brands