Canon MV530i Instruction Manual Download

Page: 60 / 164

Using the Full

Range of Features

1. Slide the program selector to

(program AE) mode.

2. Press the selector dial in to display the program menu.

3. Turn the selector dial to move the arrow up or down the display.

4. Press the selector dial in to select the desired program.

• The program will appear in the display.

Notes:

• The name of your selected recording program appears constantly on the left of

the display, with the exception of Auto, which is displayed and then disappears
after 4 seconds.

• Avoid changing programs during recording as the brightness of the image may

change suddenly.

• If you switch the camcorder from the

[

program to the

program, the

camcorder returns to the Auto mode.

• When recording in dark places a bright light in the scene

may cause a vertical light bar (“smear”) to appear. This is a
normal feature of camcorders.

Setting the program AE mode

CAMERA

CARD

CAMERA

TAPE

#3_ MV550i/530i__E(39-86) 1/9/02 14:49 Page 60

Downloaded From VideoCamera-Manual.com Manuals

Summary of Contents for MV530i





































































































































































Search results

Summary of Contents for MV530i

Reviews:

Related manuals for MV530i

Brands by name

Popular brands

Canon MV530i, Instruction Manual

Search results

Summary of Contents for MV530i

Reviews:

Related manuals for MV530i

Brands by name

Popular brands