Canon MV500 Instruction Manual Download

Page: 60 / 122

Using the Full

Range of Features

Operating effects

Sound records/plays back normally.
When operating effects in CAMERA mode, make sure the program selector is set
to

1. Press the DIGITAL EFFECTS button to open the digital effects

menu.

• D.EFFECT

, FADER and EFFECT appear.

2. Select EFFECT.

• ART, BLK&WHT, SEPIA, MOSAIC settings appear.

3. Select the desired setting.

• You return to the digital effects menu.

4. Press the DIGITAL EFFECTS button to close the menu.

• The menu disappears and the name of your selected setting flashes in the

display.

5. If you’re in PLAY (VCR) mode, press the

(play) button.

6. Press the ON/OFF button.

• The name of your selection stops flashing and takes effect on the display.
• Each time you press the ON/OFF button, the chosen effect is activated or

deactivated.

Effect on/off

Select effect

If you’re in CAMERA mode:

Fade in- Press the start/stop button.

Fade out- Press the start/stop button.

If you’re in PLAY (VCR) mode:

Fade in- Press the

(play) button.

Fade out- Press the

(pause) button.

PLAY

(VCR)

CAMERA

#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 60

Summary of Contents for MV500



























































































































Search results

Summary of Contents for MV500

Reviews:

Related manuals for MV500

Brands by name

Popular brands

Canon MV500, Instruction Manual

Search results

Summary of Contents for MV500

Reviews:

Related manuals for MV500

Brands by name

Popular brands