Canon MV500 Instruction Manual Download

Page: 28 / 122

Mastering

the Basics

Playing Back a Cassette

You can use the LCD screen for instant, on-the-spot playback. The camcorder also
plays back the sound track via the built-in speaker (

31).

• When you play back a tape, you can also close the LCD panel with its screen

side facing up.

• When you’re using the viewfinder to view playback, close the LCD panel.

To play back your recordings on a TV, see p. 32.
To use the wireless controller, see p. 43.

Note:

• To avoid accidental recording, make sure that you slide the tab on the cassette

so that it exposes the hole (the switch position is usually labelled SAVE or
ERASE OFF).

1. Attach a power source and turn the POWER switch to PLAY

(VCR).

• The power indicator lights up.

2. Load the cassette.

3. Press the

(play) button to start playback.

• To end playback, press the

(stop) button.

• To wind the tape forwards, stop playback and press the

(fast forward)

button.

• To wind the tape backwards, stop playback and press the

(rewind)

button.

• If the playback picture is rough (mosaic-like noise), clean the video heads

using a Canon DVM-CL Digital Video Head Cleaning Cassette or a
commercially available digital video head cleaning cassette.

POWER

CAMERA

PLAY(VCR)

OFF

REC

FOCUS

AE SHIFT

#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 28

Summary of Contents for MV500



























































































































Search results

Summary of Contents for MV500

Reviews:

Related manuals for MV500

Brands by name

Popular brands

Canon MV500, Instruction Manual

Search results

Summary of Contents for MV500

Reviews:

Related manuals for MV500

Brands by name

Popular brands