Canon MV MV4 Instruction Book Download Page 110

Page: 110 / 156

110

Using a Memory Card

(MV4i MC only)

1. During/after recoding a still image, press the CARD

–

button to

open the CARD PHOTO REVIEW menu.

• If you press the button after recording a still image, the last image recorded

appears in the display.

• If you press the button while recording a still image, the menu appears

immediately.

• PROTECT

, IMAGE ERASE settings appear.

• If you select

RETURN, the still image disappears.

2. Select PROTECT

and press the SELECT dial in.

• The

protect mark appears on the image.

• Now you are unable to erase this image.
• Press the SELECT dial again to cancel it.
• If you select

RETURN, the still image disappears.

2. Select IMAGE ERASE and press the SELECT dial in.

• ERASE THIS IMAGE? NO YES appears in the display.

3. Select YES and press the SELECT dial in.

• The image is erased.

To erase an image

To protect an image

CARD PHOTO REVIEW

●

Erasing still images

Erase images singly or all at once.
• You cannot erase protected images. Cancel image protection first in order to

erase an image.

• Erase images with caution. Once an image has been erased, it cannot be restored.

There are 3 ways to erase a single image.

To erase images one at a time

➡

CARD PHOTO REVIEW menu (

110)

➡

File Operation menu

(

111)

To erase images one at a time or erase all images on the memory card at once

➡

Card Operations submenu

(

115)

: When playing back an image in CARD PLAY mode

: When displaying an index screen in CARD PLAY mode

INDEX

SINGLE

CARD
PLAY

SINGLE

CARD
PLAY

CARD
R E C

#5_MV4/MV4 MC-i_E(98-125) 01/7/31 10:34 Page 110 (1,1)

Summary of Contents for MV MV4





























































































































































Search results

Summary of Contents for MV MV4

Reviews:

Related manuals for MV MV4

Brands by name

Popular brands

Canon MV MV4, Instruction Book

Search results

Summary of Contents for MV MV4

Reviews:

Related manuals for MV MV4

Brands by name

Popular brands