Chapter 10
Maintenance
103
Checking the ink level
If you reset the ink counter when you installed/replaced the ink tanks, you can check the current
ink level of the ink tanks at any time.
To check the current ink level of the ink tanks, press [COPY], [SCAN], or [PHOTO].
The LCD will display the ink level for approx. three seconds.
Indicates the remaining ink volume at three levels.
?
Indicates the ink counter was not reset after replacing the ink tanks.
NOTE
• The LCD will not display the ink level when <
LOW INK WARNING
> is set to <
OFF
>.
5
Press [OK/Set].
• The LCD displays a message asking if you replaced the black ink tank.
NOTE
• Do not press any keys other than [ ] or [ ].
6
If you replaced the black ink tank, press [ ]. If you did not, press [ ].
• The LCD displays a message asking if you replaced the colour ink tank.
7
If you replaced the colour ink tank, press [ ]. If you did not, press [ ].
• The ink counter is now reset.
NOTE
• Press [Stop/Reset] to switch the machine to standby mode.
BLACK INK CHANGED?
- YES NO +
colour INK CHANGED?
- YES NO +
Ex:
COPY MODE
COL BLK
