Canon MULTIPASS C75, User Manual, Page: 80 / 212

6-12
Speed Dialling Chapter 6
Using Group Dialling
To use this feature, you must first register a group of fax numbers for one-touch or
coded speed dialling. (
1
p. 6-9)
Follow this procedure to send a document to a group of destinations registered under a
one-touch speed dialling button or coded speed dialling code:
1
Open the document tray.*
2
Adjust the document feed lever for the
document you are loading. (
1
p. 4-2)
3
Prepare the document and load it, face
Ex:
down, in the ADF. (
1
p. 4-4)
• For colour sending, press Colour/B&W
(Currently used memory)
to turn on its light. (
1
p. 7-2)
• To adjust the resolution and contrast,
1
pp. 7-3, 7-4.
(Standby to scan)
4
Enter the group registered under a one-
touch speed dialling button or coded speed
dialling code.
❚
To enter a group registered under a one-
touch speed dialling button:
Press the one-touch speed dialling button
assigned to the group you wish to fax.
• If you press the wrong button, press Stop,
then press the correct button.
❚
To enter a group registered under a coded
speed dialling code:
Press Coded Dial, then use the numeric
Ex:
buttons to enter the two-digit code assigned to
the group you wish to fax.
• If you enter the wrong code, press Stop.
Then press Coded Dial and enter the correct
code.
5
Press Start to begin scanning for sending,
or wait a few seconds for the unit to begin
scanning automatically.
• If you prefer the unit never to scan a document
automatically after a few seconds, disable the
TIME OUT
setting. (
1
p. 14-6)
TEL=GROUP DIAL
A
21=
TEL=GROUP DIAL
DOCUMENT READY
MEMORY USED 0%
* Hong Kong, Singapore, and Malaysia only.