3. Connect your computer to the MultiPASS.
USB Cable Users-Do not connect the cable now. Instead, go to Step 5 and follow the instructions for USB
connection.
Make sure the computer is turned off. Connect a USB or parallel cable to your computer and then to the
MultiPASS.
4. Connect the power cord to the MultiPASS and to a wall outlet.
The MultiPASS has no power switch. The power is on as long as the unit is plugged in. The socket outlet
shall be installed near the equipment and shall be easily accessible.
Step 3: Install the BJ® Cartridge
Make sure the MultiPASS is plugged in.
1. Open the ADF.
Note:
If the cartridge holder is not in the center, make sure the shipping tape is removed and press the
cartridge button inside the unit.
2. Remove the cap and tape from the BC-21e Color BJ Cartridge.
3. Insert the BJ cartridge.
Raise the blue lock lever (on the right side of the cartridge holder) to the up position.