Step 2: Set Up the MultiPASS
1. Attach the sending document support.
2. Connect the phone line.
The MultiPASS unit has three telephone jacks (located on the left side of the unit) that will accept standard
line connections.
Use the bottom jack to connect the MultiPASS to the wall jack with the supplied line cord (unless
connected with Caller ID). The other two jacks are pass-through ports to connect other devices to the
MultiPASS and your telephone service. Select from the options in the diagram below to configure your
telephone device to work in conjunction with your MultiPASS.
If you have only one telephone line and plan to use the MultiPASS for receiving both faxes and voice calls,
you must attach a telephone and/or answering machine to the unit.
NOTE:
If you use Caller ID with any of these configurations, place the Caller ID device between the
MultiPASS and the wall jack.