USB
7
C
10
8
Windows
Windows XP/2000
When the
Network Setup of the Card Slot
dialog box appears, specify
the drive letter, then click
Next
.
If the error message appears, refer to "5 The following screen is displayed
during setup" in the printed manual:
Network Setup Troubleshooting
.
•
When the
Setup Completion
dialog box appears, remove the USB
cable, then click
Finish
.
Next, read "13 Information" on page 31!
To change the port name, click
View Setup Results
, then click
Set Port
Name
. For details, refer to "8 Changing the port name" in the printed
manual:
Network Setup Troubleshooting
.
If
Unsafe Removal of Device
is displayed, click
OK
.
•
•