- 5 -
MEMORY / CURRENCY CONVERSION SELECTION SWITCH
Memory Calculation
– Switch to "PRINT MEM ON" position to perform calculation using
memory and basic calculation function. Entries and result will
appear on the display and printout.
– Entries and result will appear on the display but will not be printed
out.
Currency Conversion Calculation
–
Switch to "PRINT CONV. ON" position to perform currency
conversion and basic calculation function. Entries and result
will appear on the dispaly and printout.
–
Entries and result will appear on the display but will not be
printed out.
–
Press and hold for 1 second, then enter the currency
conversion rate and press or to store the rate.
–
Press or to recall the stored currency
conversion rate.
–
Press to convert currency figure displayed from
or to the .
–
Press or to convert displayed figure from to
or .
*
1
Specifying the Number of Decimal Places for Intermediate Local Currency
Amounts.
When you convert from one national currency to another, the calculator
internally converts the original currency to Local currency. This conversion result
is the "intermediate Local currency amount". Next, the intermediate Local
currency amount is converted to the target currency. The flow of the steps of the
conversions will be shown on the printout.
For such a calculation, you should use the following procedure to specify the
number of decimal places for the intermediate Local currency amount. You can
specify from 0
(*
2
)
to 9 decimal places, for a floating decimal point (F). The
intermediate Local currency amount is rounded off to the number of decimal
places you specify.
*
2
0 is displayed when F (floating point) is set for the number of decimal places.
F is the initial default setting.
■
For rates of 1 or greater, you can input up to six digits. For rates less than 1
you can input up to 8 digits, including 0 for the integer digit and leading
zeros (though only six significant digits, counted from the left and starting
with the first non-zero digit, can be specified).
or
C
C
or
C
or
