– 18 –
4. QA Parameters
When MLT (S) frequency processing is selected, the QA parameters (%IP_PARAM%) in
Annotation are displayed in the format below.
This section describes the parameters specific to the MLT(S) (underlined 1 to 4).
For details about the other parameters, please refer to the Operation Manual (Setup Guide).
1
Frequency Processing Mode
If MLT (S) FREQUENCY is selected,
Q3
is displayed.
2
Enhancement
The parameter is displayed as:
E edge enhancement
,
edge frequency, contrast boost
Nothing is displayed if the enhancement is disabled.
3
Dynamic Range Adjustment
The parameter is displayed as:
D Maximum density
,
minimum density
Nothing is displayed if both the
DARK REGION
and
BRIGHT REGION
are disabled.
If the
DARK REGION
only is disabled, the parameter is displayed as
D*
,
3
, and if the
BRIGHT REGION
only is disabled, it is displayed as
D20
,
*
.
4
Noise Reduction
The parameter is displayed as:
N Effect
Nothing is displayed if
NOISE REDUCTION
setting is disabled.
REX680 Q3 E5,7,0 D20,3 N5 GCS18,15 R RT+90 Z0 M2,1,1 P1
1
2
3
4
