background image

9

Work safely!

Preparing the carrier

This is a list of the all the carriers that can be installed and used
with the Microfilm Scanner 400. For more details about these
options, contact your supplier. For details about installation and
operation, refer to the instructions provided with each auto car-
rier.

Fiche Carrier 190RII

A film carrier which allows viewing of fiche, jackets, or aperture
cards up to 105 mm x 190 mm.

Autocarrier 100C (AC100C)

A motorized auto carrier for 16 mm cartridge film cartridges
(ANSI, ANSI ENCLOSED

*

1

, Kodak Ektamate, 3M) that features

fast autoloading and high speed film feeding for image display.

Autocarrier 100M (AC100M)

A motorized auto carrier for 3M or TUSCAN M-Type

*

2

 cartridges

that feature fast autoloading and high speed film feeding for im-
age display.

Autocarrier 100R (AC100R)

A motorized auto carrier for 16 mm or 35 mm film wound on
standard open reels.

FS Controller I

A motorized auto carrier for 16 mm cartridge films (ANSI, Kodak
Ektamate, 3M). This carrier is required for reading film marked
with blips for image search and retrieval.

FS Controller III

A motorized auto carrier for the new 16 mm cartridge films (ANSI,
Kodak Ektamate, 3M). This carrier is required for reading film
marked with blips for image search and retrieval.

Roll/Fiche Carrier 200

A motorized fiche auto carrier for either fiche, jacket, or aperture
card format film, 16mm/35mm film standard open reels or 3M,
TUSCAN M-Type

*

cartridges.

*

1

 ANSI ENCLOSED cartridge is defined as ANSI MS-15.

*

2

 TUSCAN M-Type is a TUSCAN cartridge with a 3M-type core.

Summary of Contents for Microfilm Scanner 400



































Reviews: