manualshive.com logo in svg

Canon MF7280 - ImageCLASS B/W Laser, Sending Manual

Share
Download
Canon MF7280 - ImageCLASS B/W Laser Sending Manual Download Page 315

Error Messages

11-9

11

T

roub

lesho

o

ting

# 0703

 

Cause

The memory for image data is full when sending color documents.

 

Remedy 1 Wait a few moments, and then try sending again after other send jobs are 

complete.

 

Remedy 2 Erase documents stored in memory. If the machine still does not operate 

normally, turn the main power OFF, and then back ON.

# 0705

 

Cause

The send operation was interrupted because the size of the image data is larger 
than the Maximum TX Data Size set in E-mail/I-Fax in Communications Settings 
in System Settings (from the Additional Functions screen).

 

Remedy 1 Change the setting for the Maximum TX Data Size in E-mail/I-Fax in 

Communications Settings in System Settings (from the Additional Functions 
screen).

 

Remedy 2 Select a lower resolution.

 

Remedy 3 If you are using I-fax, decrease the number of pages containing images that you 

are sending each time, so that you do not exceed the Maximum TX Data Size.

 

Remedy 4 Set Divide into Pages to 'On' in the File Format screen.

# 0751

 

Cause

The server is not functioning. The network is down (the server is unable to 
connect to the network or was disconnected).

 

Remedy

Check the recipient's address.
Check that the network is up.

# 0752

 

Cause

The SMTP server name for e-mail or I-fax is not correct, or the server is not 
functioning.
The domain name or e-mail address may not be set.
The network is down.

 

Remedy

Check the SMTP Server name, domain name, and E-mail Address in E-mail/
I-Fax in Network Settings in System Settings (from the Additional Functions 
screen).
Check that the SMTP server is operating properly.
Check the network status.

Summary of Contents for MF7280 - ImageCLASS B/W Laser



























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands