Canon ME20F-SHN, Button Operation Manual

Page: 26 / 44

Infrared Mode
26
Infrared Mode
Using the infrared mode, the camera becomes more sensitive to infrared light, allowing you to shoot in dark
locations. During infrared mode, only some functions are available for adjustment.
1 Open the [Infrared] submenu.
[Camera Setup]
>
[Infrared]
2 Select [On] and then press SET.
• [IR] will appear on the lower right corner of the screen.
Functions available during infrared mode
Refer to the following table for a summary of functions available for adjustment.
NOTES
• Depending on the light source, autofocus may not work well during infrared mode.
Function Status
Aperture Available when the camera mode is set to [Av], [AGC] or [Manual].
Gain Available when the camera mode is set to [Manual].
Shutter speed Available when the camera mode is set to [Tv], [AGC] or [Manual].
Focus Available in all camera modes.
White balance Available only by using the [Custom Picture]
>
[Fine Tuning]
>
[White Balance] setting
when a custom picture file is selected.
ND filter Cannot be changed (turned off).
Light metering Cannot be changed (set to [Standard]).
[Camera Setup]
[Infrared]
[Off ]