Canon ME20F-SHN, Button Operation Manual

Page: 23 / 44

Adjusting the Focus
23
To set the far end of the range
4 Adjust the focus to the desired position for the far end of
the range.
5 Open the [Far] focus limit submenu.
[Camera Setup]
>
[Focus Limit]
>
[Far]
• When a focus limit has not been set, [Limit Off ] will appear on
the [Focus Limit] submenu screen. When it has been set, [Limit
On] will appear.
6 Select [Set] and then press SET.
• Select [Reset] instead to clear the focus position currently set for the far end.
• Select [Cancel] instead to cancel the operation.
To set the near end of the range
4 Adjust the focus to the desired position for the near end of the range.
5 Open the [Near] focus limit submenu.
[Camera Setup]
>
[Focus Limit]
>
[Near]
• When a focus limit has not been set, [Limit Off ] will appear on the [Focus Limit] submenu screen. When it
has been set, [Limit On] will appear.
6 Select [Set] and then press SET.
• Select [Reset] instead to clear the focus position currently set for the near end.
• Select [Cancel] instead to cancel the operation.
NOTES
• Focus limit settings will be lost when you turn off the camera or replace the lens. In such case, set the focus
limit again.
• If the limits for the near end and far end conflict, the one most recently set will take precedence and the
other will be cleared. For example, if you set a limit for the far end and then you set one for the near end that
is farther, the limit for the far end will be cleared.
• When you activate one-shot AF after setting a focus limit, if no subject can be focused on within the range,
the focus will return close to the position where it was prior to activating one-shot AF.
• If you operate the zoom after setting a focus limit, the position of the focus limit will change. Set the focus
limit again.
[Camera Setup]
[Focus Limit]
[Far] ..... [Limit Off ]
[Near] ..... [Limit Off ]