Canon ME20F-SH Page 39 Instruction Manual Download

Page: 39 / 78

ND Filter

Using the ND filter allows you to open up the aperture to obtain a shallower depth of field even when
shooting in bright surroundings. You can also use the ND filter to avoid the soft focus caused by
diffraction when using small apertures.

1 Set the camera mode to [Manual] (

33).

• Alternatively, you can leave the camera mode set to [Auto] and change the [Camera Setup]

[ND Mode] setting to [Manual] to be able to adjust manually only the ND filter.

2 Press the joystick.

• One of the adjustable settings will be highlighted in orange on the screen.

3 Push the joystick left/right to select the current ND filter setting.

4 Push the joystick up/down to select the desired setting and then press the joystick.

Options

[ND Off]:

Select this option to not use the ND filter.

[ND 1/8]:

Reduces the amount of light by 3 stops (1/8 the amount of light).

[ND 1/64]:

Reduces the amount of light by 6 stops (1/64 the amount of light)

NOTES

• Depending on the scene, the color may change when turning the ND filter on/off. Setting a custom

white balance (

41) may be effective in such case.

• When an optional RC-V100 Remote Controller is connected to the camera, you can select the ND

filter setting with the remote controller's ND button. ND filter indicators 3 and 4 are not used.

Summary of Contents for ME20F-SH















































































Search results

Summary of Contents for ME20F-SH

Reviews:

Related manuals for ME20F-SH

Brands by name

Popular brands

Canon ME20F-SH, Instruction Manual

Search results

Summary of Contents for ME20F-SH

Reviews:

Related manuals for ME20F-SH

Brands by name

Popular brands