Canon MD 216 Instruction Manual Download

Page: 61 / 77

Playback

During playback there is video noise.

- Video heads are dirty. Clean the video heads (

2).

Playback does not start.

- Load a cassette (

25).

- Set the camcorder to

(

31).

- Tape reached the end (“

END” appears on the screen). Rewind the tape (

25).

No sound from the built-in speaker.

- Open the LCD panel.
- Speaker volume is turned off. Adjust the volume with the [SPEAKER VOLUME] setting (

32).

Image will not appear on the TV screen.

- Check again that the camcorder is properly connected to the TV (

47).

Tape is running, but image will not appear on the TV screen.

- TV/VIDEO selector on the TV is not set to VIDEO. Set the selector to VIDEO (

48).

- Video heads are dirty. Clean the video heads (

2).

- You attempted to play back or dub a copyright protected tape. Stop playback/dubbing.

List of Messages

(in alphabetical order)

CHANGE THE BATTERY PACK

- Battery pack is exhausted. Replace or charge the battery pack (

15).

CHECK THE CASSETTE [AUDIO MODE]

- You attempted to dub audio (

49) on a tape recorded with an audio mode other than [

12bit].

CHECK THE CASSETTE [BLANK]

- You attempted to dub audio (

49) on a tape with a blank section.

CHECK THE CASSETTE [INCORRECT TAPE SPECIFICATION]

- You attempted to dub audio (

49) on a tape recorded in HD (high definition) standard.

CHECK THE CASSETTE [REC MODE]

- You attempted to dub audio (

49) on a tape recorded in a recording mode other than SP.

CONDENSATION HAS BEEN DETECTED

- Condensation has been detected in the camcorder (

66).

CONDENSATION HAS BEEN DETECTED REMOVE THE CASSETTE

- Condensation has been detected in the camcorder (

66). Remove the cassette.

HEADS DIRTY, USE CLEANING CASSETTE

- Video heads are dirty. Clean the video heads (

2).

Summary of Contents for MD 216














































































Search results

Summary of Contents for MD 216

Reviews:

Related manuals for MD 216

Brands by name

Popular brands

Canon MD 216, Instruction Manual

Search results

Summary of Contents for MD 216

Reviews:

Related manuals for MD 216

Brands by name

Popular brands