background image

Video

44

Digital Effects

POINTS TO CHECK

Mode switch: 

Options



 Default value

Setting

 

[

 

D.EFFECT  OFF] 

 

Desired option* 

**

* While making the selection, you can 

preview the effect on the screen.

** The icon of the selected effect appears.

Applying

Press 

 to activate the 

fader/effect.

• The icon of the selected effect turns 

green.

• Press  

again 

to deactivate 

the fader/effect.

Press  

...

: ...in record pause mode, 

then press 

 to start recording 

with a fade in.

: ...in playback pause mode, 

then push the joystick (

) toward 

/

 to fade in and start the playback.

(

19)

[

 D.EFFECT OFF]



Select this setting when you do not intend to 
use the digital effects.

[

 FADE-T] (fade trigger), [

 WIPE]

Select one of the faders to begin or end a scene 
with a fade from or to a black screen. 

[

 BLK&WHT]

Records images in black and white.

[

 SEPIA]

Records images in sepia tones for an “old” 
look.

[

 ART], [

 MOSAIC]

Select one of these digital effects to add 
“flavor” to your recordings.

FUNC.

(

20)

T

O

 F

ADE

 I

N

FUNC.

FUNC.

D.EFFECTS

D.EFFECTS

D.EFFECTS

Start/Stop

CO

PY

Summary of Contents for MD 216














































































Reviews: