manualshive.com logo in svg

Canon MB2300 series, Online Manual, Page: 931 / 1155

Share
Download
Canon MB2300 series Online Manual Download Page 931

If a device (e.g. microwave oven) using the same frequency bandwidth as the wireless station is placed nearby,
the device may cause interference. Place the wireless station as far away from the interference source as
possible.

Check11

 Make sure that the network settings of the computer are correct.

Make sure that the computer can communicate with the access point over the wireless LAN.

Check12

 Make sure that 

Enable bidirectional support

 is selected in the 

Ports

 sheet of

the properties dialog box of the printer driver.

Check13

 Make sure that the firewall of the security software is disabled.

If the firewall function of your security software is turned on, a message may appear warning that Canon
software is attempting to access the network. If the warning message appears, set the security software to
always allow access.

If using any programs that switch the network environment, check their settings. Some programs will enable a
firewall by default.

Check14

 When using a router, connect the machine and computer to the LAN side

(same network segment).

If the problem is not resolved, perform setup again with the Setup CD-ROM or perform it according to the
instructions on our website.

931

Summary of Contents for MB2300 series




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments