Canon MB2300 series, Online Manual, Page: 771 / 1155

3. Scan res (Scan resolution)
Select the resolution for scanning.
4. Preview
Select to preview the scanned data or not when saving the data on a USB flash drive.
5. ADF orientation
Select the orientation of the original document.
This setting item is not available when Photo is selected for Doc.type .
6. Reduce show-thru (Reducing show-through)
Characters on the back may show through when scanning a thin document such as a newspaper. Select
ON if characters seem to show through on the scanned document.
This setting item is not available when Photo is selected for Doc.type .
7. Descreen
A printout consists of minute dots to make characters or graphs. Interfering with each dot may result in
uneven shades or a striped pattern. Select
ON if you notice any uneven shades or a striped pattern on
the scanned image.
This setting item is not available when Photo is selected for Doc.type .
Note
• Even if ON is selected for this setting, some moire effects may remain if Unsharp mask is set to
ON . In that case, select OFF for Unsharp mask .
8. Unsharp mask
The outline of small characters or thin objects such as a hair or leaves on a photo can be accentuated.
Select
ON if you want to accentuate the outline of the scanned data.
771