Canon MAXIFY MB2710, Online Manual, Page: 1023 / 1366

#003 Document is too
long.
You attempted to send a document longer than 15.75 inches / 400 mm.
You cannot send a document longer than 15.75 inches / 400 mm from the ADF.
"#003" is also printed if it takes time to send a page. Divide the document or set the
image quality (Fax resolution) to a lower setting, and then resend it.
#005 No answer. The recipient's fax device does not respond.
Contact the recipient and have the recipient check that the telephone line is connected
correctly.
#012 No paper is in the re-
cipient's fax device.
There is no paper in the recipient's fax device.
Contact the recipient and have the recipient load paper.
#017 No tone is detected. The printer could not detect the dial tone.
Dial tone detect in Advanced FAX settings under FAX settings is set to ON . Set to
OFF .
Advanced FAX settings
#018 Line was busy. The fax/telephone number you dialed is busy.
Try dialing again after waiting for a moment.
#022 Number is deleted. The fax/telephone number registered in the printer's directory is incorrect.
Check the recipient's fax/telephone number, correct the fax/telephone number regis-
tered in the printer's directory, and then send the document again.
Changing Registered Information
#037 Memory is full. The printer could not send a fax because its memory is full.
Delete contents in memory, and then send a fax again.
Document Stored in Printer's Memory
#059 Transmission has
been canceled due
to a fax information
mismatch.
Transmission has been canceled because the printer could not detect the recipient's
fax device information or the information did not match the dialed number. This mes-
sage is displayed when
Check RX FAX information in Security control under FAX
settings is set to ON .
For details, see Sending Faxes after Checking Information (Checking Recipient's Infor-
mation) .
#085 Try again in black &
white transmission.
The recipient's fax device is not color-compatible.
Resend the document in black & white.
#099 The Stop button was
pressed during
transmission.
The Stop button was pressed to cancel transmission of the document. Resend it if
necessary.
#412 The fax could not be
sent from the com-
puter.
The fax could not be sent from the computer. Ensure that the printer is connected with
the computer correctly and redo operation.
#995 The unsent fax was
deleted while auto-
matic redialing.
While automatic redialing, the unsent fax is stored in the printer's memory temporarily
until the sending fax is complete. If a power failure occurs or you unplug the power
1023